Wireless Level Monitoring

WellAware offers multiple sensor options, including hydrostatic, radar, floats, and ultrasonic. We’ll help you determine the best sensor type based on your unique application. All of our sensors go through rigorous testing to ensure reliability and accuracy for their applications.

WellAware has been tested on a wide variety of vessel shapes, sizes, and materials holding various types of solids liquids, ranging from ponds holding brackish water to grain siloes to food slurries. For more information on if your vessel or medium is supported, contact our team using the form below.

All WellAware level sensors are constructed from high-quality materials with the necessary certifications to work in your application and environment. For technical specifications on the different sensors, download our datasheet above or contact us using the form below.

Yes. Standard WellAware level sensors can operate over a wide temperature range between -67ºF and 257ºF, and come with temperature compensation electronics to ensure level accuracy even in highly variable conditions.

Calibration happens in just a few easy steps using the WellAware Field App. First, enter the shape and capacity of the vessel (no tape measure’s required!), then set the sensor zero, then install the sensor and record the volume. Calibration data is immediately stored on the device. No need to go online or call tech support.

Nope! WellAware Tank Level Monitoring uses a proprietary normalization procedure to automatically calibrate level to volume based on the shape of the tank. Our algorithm has been shown to be even more accurate than some tank manufacturer strapping tables, so rest assured you are getting great tank level data.

In most cases, no. WellAware sensor calibrations natively support multiple vessels shapes out of the box. All you need to know is the maximum capacity of the vessel. The WellAware Field App takes care of the rest. For highly irregular tank or vessel shapes, our Solutions Design team will help you develop a calibration solution.

WellAware Tank Level Monitors are extremely power efficient, drawing just microamps of power the majority of the time they operate. For most applications, battery life will be between 1-2 years, however extreme environments or higher transmission rates will reduce the power budget.

The WellAware Level Monitor uses standard 3.6V Lithium D-Cell batteries. You can buy them online or anywhere industrial batteries are sold.

Yes. The WellAware Tank Level Monitor can be externally powered using a 12-24 V DC power source, including solar assemblies. Note that WellAware does not sell external power sources.

You choose! Standard polling rates include hourly data samples with transmission every 3 hours, but that’s configurable. You can get accurate level data every 5 minutes if you want. Keep in mind that faster data rates do require more power, and in some cases, may increase cost.

Our standard tank level monitors operate on 4G LTE cellular connectivity from AT&T or Verizon. If your location does not have cell coverage, we offer satellite connectivity through Iridium at reduced data rates. Note that satellite connectivity is only feasible for outdoor installations with a clear line of sight to the sky.

Don’t worry, our level sensors don’t need WiFi to work. They run on publicly available cellular networks, and you only need a very weak cellular signal to get accurate level data. If for some reason the cellular network drops out temporarily, our level monitors store level readings and upload them when service is restored.

So long as you are our customer, we will replace the level monitoring device free of charge if it ever breaks during normal use. This lifetime warranty includes over-the-air firmware upgrades as well as hardware upgrades, if necessary (For example, if 4G LTE networks become obsolete in the future, we will happily ship you a 5G replacement). Level sensors may also be covered under this lifetime warranty for certain applications.