Wireless
Flow
Monitoring

Our standard flow meters are NuFlo turbine meters designed for both liquid and gas applications, however we offer different sensors for different applications. We’ll help you determine the best sensor range, material, process connection, and certification based on your unique application. All of our sensors go through rigorous testing to ensure reliability and accuracy for their applications.

WellAware flow monitoring has been tested on a variety of liquids and gases, including water, crude oil, food products, natural gas, and more. Sensor selection and accuracy will vary depending on the type of fluid being monitored. For more information on if your process or fluid is supported, contact our team using the form below.

Our standard flow meter sensor is made of 316L stainless steel. All WellAware flow sensors are constructed from high-quality materials with the necessary certifications to work in your application and environment. For technical specifications on the different sensors, download our datasheet or contact us using the form below.

Yes. Standard WellAware flow meter sensors can monitor flow in processes ranging from –67 °F to + 450 °F. The wireless flow transmitter has an operating temperature range between –40 °F to + 158 °F.

Yes. We offer multiple sensor sizes ranging from 3/8″ to 8″ with measurable flow rates between 0.3 – 3,500 GPM.

Absolutely. WellAware supports multiple integration paths to get pressure data into your existing SCADA software, including FTPS/SFTP, MQTT, and API. We make integrations easy – just let us know your integration requirements and we’ll get it done.

Calibration happens in just a few easy steps using the WellAware Field App. Simply enter the range of the flow sensor, calibrate to current readings, and submit. Calibration data is immediately stored on the device. No need to go online or call tech support.

WellAware FlowTransmitters are extremely power efficient, drawing just microamps of power the majority of the time they operate. For most applications, battery life will be between 1-2 years, however extreme environments or higher transmission rates will reduce the power budget.

The WellAware Flow Transmitter uses standard 3.6V Lithium D-Cell batteries. You can buy them online or anywhere industrial batteries are sold.

Yes. The WellAware Flow Transmitters can be externally powered using a 12-24 V DC power source, including solar assemblies. Note that WellAware does not sell external power sources.

You choose! Standard polling rates include hourly data samples with transmission every 3 hours, but that’s configurable. You can get accurate flow rate data every 5 minutes if you want. Keep in mind that faster data rates do require more power, and in some cases, may increase cost.

Our standard flow transmitters operate on 4G LTE cellular connectivity from AT&T or Verizon. If your location does not have cell coverage, we offer satellite connectivity through Iridium at reduced data rates. Note that satellite connectivity is only feasible for outdoor installations with a clear line of sight to the sky.

Don’t worry, our flow transmitters don’t need WiFi to work. They run on publicly available cellular networks, and you only need a very weak cellular signal to get accurate flow rate data. If for some reason the cellular network drops out temporarily, our flow transmitters store flow rate and volume readings and upload them when service is restored.

So long as you are our customer, we will replace the flow transmitter free of charge if it ever breaks during normal use. This lifetime warranty includes over-the-air firmware upgrades as well as hardware upgrades, if necessary (For example, if 4G LTE networks become obsolete in the future, we will happily ship you a 5G replacement). Flow sensors may not be covered under the lifetime warranty, depending on application.