Wireless Temperature Monitoring

Our standard explosion-proof sensor option is a 100 Ohm platinum RTD, however WellAware offers multiple sensor options for different temperature applications. We’ll help you determine the best sensor range, material, and certification based on your unique application. All of our sensors go through rigorous testing to ensure reliability and accuracy for their applications.

WellAware has been tested on a wide variety of processes and media with various types of gasses and liquids, ranging from wellheads to pipelines to vessels. For more information on if your process or medium is supported, contact our team using the form below.

Our standard RTD sensor has a platinum sensing element with 316L stainless steel sheathing. All WellAware temperature sensors are constructed from high-quality materials with the necessary certifications to work in your application and environment. For technical specifications on the different sensors, download our datasheet or contact us using the form below.

Yes. Standard WellAware temperature sensors can measure process temperatures up to 1,220 °F. The wireless temperature transmitter has an operating temperature range between –40 °F to + 158 °F.

Absolutely. WellAware supports multiple integration paths to get temperature data into your existing SCADA software, including FTPS/SFTP, MQTT, and API. We make integrations easy – just let us know your integration requirements and we’ll get it done.

Calibration happens in just a few easy steps using the WellAware Field App. First, enter the range of the temperature sensor, then set the sensor zero, then install the sensor and record the temperature. Calibration data is immediately stored on the device. No need to go online or call tech support.

WellAware Temperature Transmitters are extremely power efficient, drawing just microamps of power the majority of the time they operate. For most applications, battery life will be between 1-2 years, however extreme environments or higher transmission rates will reduce the power budget.

The WellAware Temperature Transmitter uses standard 3.6V Lithium D-Cell batteries. You can buy them online or anywhere industrial batteries are sold.

Yes. The WellAware Temperature Transmitters can be externally powered using a 12-24 V DC power source, including solar assemblies. Note that WellAware does not sell external power sources.

You choose! Standard polling rates include hourly data samples with transmission every 3 hours, but that’s configurable. You can get accurate temperature data every 5 minutes if you want. Keep in mind that faster data rates do require more power, and in some cases, may increase cost.

Our standard temperature transmitters operate on 4G LTE cellular connectivity from AT&T or Verizon. If your location does not have cell coverage, we offer satellite connectivity through Iridium at reduced data rates. Note that satellite connectivity is only feasible for outdoor installations with a clear line of sight to the sky.

Don’t worry, our temperature sensors don’t need WiFi to work. They run on publicly available cellular networks, and you only need a very weak cellular signal to get accurate temperature data. If for some reason the cellular network drops out temporarily, our temperature transmitters store temperature readings and upload them when service is restored.

So long as you are our customer, we will replace the temperature monitoring device free of charge if it ever breaks during normal use. This lifetime warranty includes over-the-air firmware upgrades as well as hardware upgrades, if necessary (For example, if 4G LTE networks become obsolete in the future, we will happily ship you a 5G replacement). Temperature sensors may also be covered under this lifetime warranty for certain applications.